Snezha75
when kneading ... and bouncing ... is this normal? Or do you need to do something about it? I bought it yesterday ... yesterday and tried to bake the bread ... it was baked beautifully ... only when the dough was kneading, the bucket jumped SO ... I periodically adjusted it with my hands ...
Snezha75
And what, So few lucky ski owners? And nobody's bucket ever knocked?
Mams
Snow, did you insert the bucket correctly? Skis need to adapt to insert it correctly. And yet, sometimes the handle of the bucket shakes when we insert the bucket into the HP - check if the handle of the bucket is lowered, whether it is fixed.
In principle, it should help. I also did not immediately understand how to shove the bucket. Good luck!
richie
Please, help. I have had an LG 202 bread maker for 6 years. Bakes a miracle. But recently, no signal has been heard at all when it is necessary to lay additional products. She stands in the kitchen next to the stove.
MariV
Buy a Chinese timer in Ashan for 15 rubles, or there is such an option in your mobile phone - a timer - set the time when you need to throw what you need into your HP - and that's it.
Why be offended by the old woman!
Pogremushka
Dear bakers, help with advice. Stove LG 204. Age years 5. The scapula began to creak quite loudly during kneading. And more recently, I discovered that black butter protrudes from under it (apparently, the one with which the structure is lubricated) and gets into the bread! What to do?
Lenusya
Pogremushka, at Kashki there was a similar situation, only black water flowed onto the table.
I also thought a couple of times that the engine oil was getting into the mold (then I still had HP LG), I called the service, where the master said that there was only dry lubricant in the block. That time, I turned on the batch twice in a row, it might overheat. When baking on the main programs, then everything returned to normal.
Call the service, maybe they will prompt you something.

Here in this thread there was a discussion of a similar question
Repair of the form (bucket) of the LG bread machine
https://Mcooker-enn.icdself.com/index.php@option=com_smf&topic=59.0
Vitae
It's good that I served for 5 years! It is necessary to change the oil seal and the bearing - this is the unit where the blade is put on. Black liquid - water leaked during mixing. My LG 206HB lasted 8 months, the service was replaced under warranty. Approximately 450 loaves of bread were baked.
Pogremushka
Mother's stove. For 5 years, my mother baked 5 breads, worked everything for the dough, but also not too often. And then I took her to test for a week, decide to buy or not. So for the 4th month we are testing every day, or even 2 times a day)) We decided to buy, but apparently now we will have to buy 2 stoves - for myself and my mother.
Pogremushka
Today I discovered that a spatula (!) Scratches the bottom during kneading! And I thought it was nuts and other additives. I really did not expect such tricks.
kosmas76
bread maker LG HB-151JE after cooling mode, 8 beeps sound and [H] lights up on the indicator, as I understand this is heating mode when you press the STOP button, nothing happens. I take out the form with this indication and turn off the stove from the socket. This is normal? End shouldn't light up?
avgusta24
The Stop button must be pressed and held for a few seconds. Then the program is reset and the indicator will show 1 A (that is, the initial, first program). Heating stops. Take out the bread and unplug the oven
Atlantis
Guys, help me urgently !!!!!!
I don't know what to do, when the stove is turned on, it slows down, as if the bricks are in the way, it stops, I pulled out the bucket and installed it again, but it works a little bit, the bread somehow baked, I wiped the bucket, it dried out, began to spin the spatula, and it looks like rust one place slows down. What to do, who knows ??? Maybe you need to lubricate somewhere?
Atlantis
URGENTLY! WHAT TO DO?
Guys, help me urgently !!!!!!
I don't know what to do, when the stove is turned on, it slows down, as if the bricks are in the way, it stops, I pulled out the bucket and installed it again, but it works a little bit, the bread somehow baked, I wiped the bucket, it dried out, began to spin the spatula, and it looks like rust one place slows down. Who knows what to do? Not understanding Uncomprehending ?? Maybe you need to lubricate somewhere?
anatoliy_61
I ask for help ... Bread maker LG HB-151 JE. The service shop did not want to make repairs under warranty. When inspecting the control board, a burned-out microcircuit with 44 legs was revealed (it is one on the board). I beg you, maybe someone knows what kind of microcircuit it is or what its Russian analogue. I really hope for help ...
Alyonushka
In the LG HB-202 CE bread maker, a spatula pops up when kneading the dough. Tell me what could be the reason. The oven is new.
vlavlamed

Good day!
I bought an LG oven in the third batch, the blade stopped spinning. I looked, it turns out that the locking ring on the rotation mechanism flies off and broke the groove. Question: Will they change my bucket in the store or will they still say that he is guilty himself?
Bulb
Bread maker LG 152 CE.
There was a problem with the inclusion of modes under even numbers.
The button block is a touch-sensitive one, apparently, some kind of software failure or something with contacts.
Maybe someone faced such a problem?
Help with advice, please!
andre
Please, help. I have an LG-159E bread maker. She worked for 6 months, then the smell of wiring went, but not like products on a spiral. The bread is not baked, does not rise to ¼ of the normal level. I contacted the service under warranty. A week later, they said everything was in order, repairs were not required, like they were worried in vain, they didn't even make a mark in the guarantee. I tried different recipes, the components, the dosage is all in vain ... I try to make repairs on my own, I experiment with the thermal sensor, but there is nothing but everything. Maybe I'm on the wrong track ... Guys, help !!!!!! I look forward to any help !!!!
YURIS1972
A question for the happy owners of LG bread makers! We have been using HB-152CE for so long that it is inconvenient to say. The last 2 times we noticed that it does not interfere with such zeal and persistence as before. Slowly, in a word, that's why the quality of the bread is appropriate. I looked at the state of the drive - I did not find any visible and tangible problems, but there was such garbage - 2 times within 2 months the belt flew off. What are your thoughts on this case?
sazalexter
Quote: YURIS1972

A question for the happy owners of LG bread makers! We have been using HB-152CE for so long that it is inconvenient to say. The last 2 times we noticed that it does not interfere with such zeal and persistence as before. Slowly, in a word, that's why the quality of the bread is appropriate. I looked at the state of the drive - I did not find any visible and tangible problems, but there was such garbage - 2 times within 2 months the belt flew off. What are your thoughts on this case?
Check the bucket, or rather the mixer unit, if it is difficult to rotate by hand, change the bucket. There may still be wear on the bucket drive unit bearing.
Alena88888
I have an LG HB 155 CJ bread machine. I bought it a week ago. I bake 2 times a day and never once did I get bread - it doesn't rise and is not baked. (I bake wheat in different modes - the main, French, Russian chef) I tried to bake a cake in the "Bake" mode, it was also not baked. Before buying and baking bread, I studied this entire wonderful forum. Therefore, I can say that my bun was good, the yeast - saf-moment is not expired, the recipe and the order of laying the products was strictly observed. I tried to bake rye bread according to the recipe of this forum - it turned out to be a well-baked crust on top, and porridge inside. Please tell me what could be the reason? Or is the stove just faulty?
Olga2801
We bought the oven a week ago, it seems to bake the bread well, but we faced the following problem: instead of the smell of fresh baked goods, the apartment smells of hot plastic. Can anyone come across, tell me what to do?
sazalexter
Quote: Alena88888

I have an LG HB 155 CJ bread machine. I bought it a week ago. I bake 2 times a day .....Please tell me what could be the reason? Or is the stove just faulty?
This is for you here https://Mcooker-enn.icdself.com/index.php@option=com_smf&topic=144.0
sazalexter
Quote: Olga2801

We bought the oven a week ago, it seems to bake the bread well, but we faced the following problem: instead of the smell of fresh baked goods, the apartment smells of hot plastic. Can anyone come across, tell me what to do?
Take it to the service center or wait until it disappears.
frosenka
What a blessing that I found this forum. Now I know what to do with a dry-stuck stirrer in a bucket
tanjushka-d
Help!!!!!!!!!!! after 2 weeks of use, a knife began to fly off during the kneading process, who faced this? What is the reason?
Lauren
Hello! I have been baking in my LG-201 bread maker for the second year already and I was faced with the fact that while stirring it began to knock on the walls of the stove as a "victim". Bakes well. Can someone identify the cause of the knocking.
anna54.16
Maybe someone knows why the crust stopped baking. The color of the bread is normal, rosy, and the crust is white. Previously baked with a beautiful ruddy crust. In the program I put the letter C-dark crust. Bread maker LG HB 156 JE. She worked for 3 years. Baker and cooked some jam on it.
sel555
I have an LG HB 155 CJ bread machine. I bought it a week ago. I bake it 2 times a day ..... Please tell me what could be the reason? Or is the stove just faulty?
This is for you here https://Mcooker-enn.icdself.com/in...ption=com_smf&topic=144.0

The link does not work. And there is a similar problem. The LG HB 155 CJ oven worked well for 3 months, and then the problems started, then the dough does not stir, then it does not bake and the top of the bread settles. Tried different recipes and ingredients.
What could be the problem. Thanks for any help.
goldenflov
Tell me please! I have HP LG 2051, when they sold it to us in the store, they said that it can bake bread from whole grain flour. When we started choosing recipes, it turned out that this model does not have such a mode. Please tell me on what mode you can bake whole flour bread and can there be any peculiarities? We tried 50% of whole grain flour and 50% of usual once, the mode is usual, everything is baked, but we want it to be completely from whole flour.
mowgli
I have a LV after a great repair ... after 8 years of operation everything flew - an oil seal, a bearing, a belt .. Yesterday I brought it home, baked bread by eye .. I looked at the dough mixer somehow kneading everything from below, the bun does not spin And the bread turned out like this as if they forgot to put the kneader .. So I think what should I do? - buy a new one or try to reanimate again ..
ruspas
Hello everyone. The second time the stove gives Error 3. What is this error and how to deal with it ???
alexs48
Such information on the display indicates a malfunction of the temperature sensor.
Macha
Dear bakers! Your help is very necessary!
I have been using LG2001 for 14 months now. I am quite happy and bought my mother the same one exactly.
And now we have trouble: a couple of times there was a voltage drop in the network (and the HP worked), now it does not heat, that is, it does not bake. I know for sure about the voltage drop - audio and video equipment is connected through an uninterruptible power supply and it "screams".
It interferes with HP normally, clicks when it's time to heat (during the dough period), and when the baking time comes, after 5-10 minutes it gives Err 3. Teng is cold.
I'll tell you right away - I can't use the service. I'm in a country where there is no service and I'm not sure if we can find a thermal sensor. The maximum that is available is to ask to buy the necessary part in the Russian Federation and give it to us.
Or buy a new HP ... But I don't want to get used to another ...
Help diagnose the breakdown and find a spare part. If the thermal sensor is out of order, then tell me what marking it has (or maybe it will fit from another device?) Without HB - it's just a nightmare! So used to not buying bread ...
SoS!
alexs48
Most likely, in your HP, the turning on transistor KRC 107M is open, the processor command to turn on the heating element is not executed. This is if all other operations are performed. No error message was shown on the display.
Macha
Thank you for responding!
The display shows error no. 3 when the baking time is right (after 5 minutes). And so the HP kneads, goes through the whole cycle, but there is no heating ... I remember that with the last baked goods, a strange smell appeared.
Please tell me whether the KRC 107M switching transistor is specific for bread makers or can you look for it on radio markets and similar places?
sazalexter
Macha If you do not find a Korea Electronics (KEC) KRC107M transistor 🔗 then try to find its analogue of DTC114YN or, in extreme cases, DTC114YSA from Rohm 🔗
This transistor is not specific; they are used in audio-video equipment, and even where
alexs48
It was already written here, if it gives error3 on the display, look for the problem starting with the temperature sensor.
sgpuh
From the answers on the forum, I realized that if it gives an error Er 3, then the problem is most likely in the temperature sensor. Stove LG 152 CE. A tester at room temperature gives the resistance "infinity". How can I find its parameters and number?
alexs48
The temperature gauge shows infinity, that's right. Look along the circuit, there is a KRC 107M transistor, check it. Download the 12th issue of the "Repair and Service" magazine, at mega-, there are some recommendations for repairing such HP.
mova
Good day to all! I could not find a more suitable topic for my question, so I decided to contact here. I'm just choosing a bread maker so far, and the following question arose: do all bread makers have a bucket with a non-stick coating or is there with others? Who does NOT have a non-stick coating, please respond.
sazalexter
Quote: mova

Good day to all! I could not find a more suitable topic for my question, so I decided to contact here. I'm just choosing a bread maker so far, and the following question arose: do all bread makers have a bucket with a non-stick coating or is there with others? Who does NOT have a non-stick coating, please respond.
All HPs have a Teflon coating, like pans, saucepans and other kitchen utensils and not only
alexs48
There is a non-stick coating in all HP, the quality of the form and HP depends on the price.
inga48
Good day. Help!!! Less than six months later, I bought HP LG HB-156 JE and literally tonight I found a damaged coating inside the bucket. On the wall, it swelled and burst, and at the bottom, at the very screw, it turned white and was about to peel off too. Operated clearly according to the instructions, and here on you I did not have time to enjoy the purchase and on you. What to do, help !!!!!!!
alexs48
If the finished bread sticks, lightly grease the bucket with vegetable oil before setting.
inga48
This is all understandable, of course. But I am interested in something else, because of what all this happened, and if I contact the service, will they replace my bucket? After all, the guarantee is not over yet.
alexs48
Obliged, the bucket is quite expensive.
kolya154000
Quote: Macha

Thank you for responding!
The display shows error no. 3 when the baking time is right (after 5 minutes). And so the HP kneads, goes through the whole cycle, but there is no heating ... I remember that with the last baked goods, a strange smell appeared.
Tell me, please, is the KRC 107M switching transistor specific for bread makers or can you look for it on radio markets and similar places?
They wrote about the transistor if there was no error message. I had Err3 just like you, it turned out that the contacts in the relay just burned, cleaned it - everything worked.
kolya154000
Quote: alexs48

The temperature sensor shows infinity, that's right. Look along the circuit, there is a KRC 107M transistor, check it. Download the 12th issue of the "Repair and Service" magazine, at mega-, there are some recommendations for repairing such HP.
In this journal it is written that the resistance of the temperature sensor at 25 C is about 100 kOhm

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers