Admin
Cleaning the cuckoo gum

Photos provided by the site 🔗



!

In this topic, we talk, advise, share our experience on how to CLEAN THE SEALING RUBBER
Admin

RECOMMENDATIONS:

▪ Only wash the cover by hand using a soft sponge or cloth. Do not wash the lid in the dishwasher.

▪ Before each preparation, check that the valves are not blocked by food debris or anything else. If this happens, thoroughly clean the valve.

▪ It is not necessary to clean the valves every time you use them, it is enough to clean them from time to time when you see that they are dirty.

▪ Wash the rubber ring after each use in warm water using non-aggressive detergents without abrasive particles.
Aunt Besya
Well, today I arranged a global cleaning for my cuckoo with the removal of the rubber band and valve. I washed the valve regularly, but I took off the gum for the first time and it was in vain - there was a lot of dirt there and the gum at the working edge darkened and is no longer washed off So, girls. wash the gum regularly, do not repeat my mistake!
Tanyulya
Quote: Aunt Besya

Well, today I arranged a global cleaning for my cuckoo with the removal of the rubber band and valve. I washed the valve regularly, but I took off the gum for the first time and it was in vain - there was a lot of dirt there and the gum at the working edge darkened and is no longer washed off So, girls. wash the gum regularly, do not repeat my mistake!
I clean it and clean it with a steam generator, once the truth is a little bit wrong to insert aaaa, steam went out from under the lid, so they washed and checked.
julifera
And for me, due to the fact that 1010 drains all the moisture inside, I have to wipe it every, every time, at the same time I wipe the gum, you can see that there are black circles, but they are well rubbed off freshly.
sazalexter
Quote: Aunt Besya

and the elastic band at the working edge has darkened and is no longer washed off. So, girls. wash the gum regularly, do not repeat my mistake!
My cuckoo's silicone seal also darkened, but this does not affect the "speed"
Natasha P.
I read in the instructions for my kukko 1054 that the life of the sealing gum is 1 year. I have more than a year already. But about a month ago, after the words "Steam release begins", steam is released in about 30 seconds. And before it flew out almost immediately. And during the closing of the lid, there is no characteristic sound. Is my elastic band worn out?
Natasha P.
What are all the same signs that it is time to install a new rubber band? Hey !! Who has already encountered this?
Tanyulya
Quote: Natasha P.

I read in the instructions for my kukko 1054 that the life of the sealing gum is 1 year. I have more than a year already. But about a month ago, after the words "Steam release begins", steam is released in about 30 seconds. And before it flew out almost immediately. And during the closing of the lid, there is no characteristic sound. Is my elastic band worn out?
The problem is not in the elastic, but in the valve. It is a common problem for the 1054 valve to clog up there intermittently. Or clean it yourself or at a service center. Read here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=164206.0

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers