Masinen
Good afternoon, everyone, today I will introduce you to the Caso FW2000 meat grinder closer and in more detail.
Video review and preparation of minced meat from unprocessed meat.

Meat grinder CASO FW 2000
The meat grinder is packed in a branded colorful box.
Meat grinder CASO FW 2000
Inside the box, everything is packed in foam and each accessory is in a separate bag.
Meat grinder CASO FW 2000

Includes instructions in Russian and other languages.
Meat grinder CASO FW 2000
Removing the styrofoam, you will see the motor unit in a soft scratch-resistant bag and the assembled auger.
Meat grinder CASO FW 2000

The set includes three grilles of different calibers. Large, medium and small
Meat grinder CASO FW 2000

Saber knife, sharp
Meat grinder CASO FW 2000
sausage attachment and cookie attachment
Meat grinder CASO FW 2000
Loading tray
Meat grinder CASO FW 2000
Disassembled auger
Meat grinder CASO FW 2000
Auger body, auger, nut, loading tray Not dishwasher safe

Insert into the hopper to store all accessories
Meat grinder CASO FW 2000Meat grinder CASO FW 2000Meat grinder CASO FW 2000
closed with a transparent lid
Meat grinder CASO FW 2000

reverse side of the auger
Meat grinder CASO FW 2000
Masinen
The auger inlet is fastened in one movement, which completely eliminates backlash.
When installing the auger body, the lever must be in a horizontal position. Insert the auger and move the lever to the vertical position, fixing the auger body
Meat grinder CASO FW 2000

specially made marking in the form of locks
Meat grinder CASO FW 2000Meat grinder CASO FW 2000

The meat grinder cord is long, which is very pleasing.
The bottom of the grinder is made of a non-slip base with two suction cups
And a compartment for the coiled cord
Meat grinder CASO FW 2000

The body of the meat grinder is made perfectly, without any scratches and burrs and unnecessary buttons.
there is a speed regulator on the body. The meat grinder has two speeds and a reverse.
Meat grinder CASO FW 2000Meat grinder CASO FW 2000Meat grinder CASO FW 2000

The knife, grates, sausage attachment, cookie attachment, pusher can be washed in the dishwasher, as the instructions say!
BUT I prefer to wash the knife and grates by hand.
When the box was opened, there were no foreign chemical odors.
Masinen
The first experience was the processing of unprocessed lamb meat, peritoneum, for minced meat.
I left all those films, veins, fat, did not cut anything, only removed the bones from the ribs.
The meat grinder turned the meat without any hesitation and problems.
Meat grinder CASO FW 2000Meat grinder CASO FW 2000Meat grinder CASO FW 2000

then I made minced meat cutlets. It turned out juicy and very tasty)
Fried on each side for 5 minutes
Meat grinder CASO FW 2000Meat grinder CASO FW 2000
Lerele
I've been thinking, thinking, but still I won't buy, but it's a pity, such a cool meat grinder. But I have already written a thousand times that we have good minced meat, and if I did, it would be once a year.
This is how I dissuade myself, but I will follow the topic for sure
gala10
Mashenka, kidding, right? Are you mocking, right? After your review, I will now dream of this meat grinder all New Year's Eve. I think she is very cool. And it meets all your needs. In general, I will wait, maybe someone will give it.

I will give this post to read to all relatives and friends, maybe someone will understand the hint ...

Lerele
gala10, but I already dreamed
And I can buy it, but buy it on the "table" ... I'll think again, I'll see what Masha is eating, maybe Mistletoe will pull herself up, what if I need something like that
Omela
Masha, great review. Yesterday I also worked hard .. so as not to drag it back and forth twenty times at once I cooked three dishes - meat cutlets, vegetable cutlets, cookies.)) I recorded everything, now I would have found time to arrange.)
Masinen
Quote: Lerele
This is how I dissuade myself, but I will follow the topic for sure

Nothing, we will persuade you))
Nobody left the Bread Maker alive: mail:

Quote: gala10
In general, I will wait, maybe someone will give it.
That's right, show me. I always do this, I start to show everyone, maybe I’ll shake someone out
Quote: Lerele
Mistletoe pull up

Look, we are waiting for Omelchik !!!

Masinen
Omela, Ksyusha, so come on, gradually and upload your masterpieces.
Maybe Lerele will be tempted))
Masinen
And I decided to decorate the cutlets with a recipe, they are very tasty)

Lamb cutlets (Masinen)

Meat grinder CASO FW 2000
Omela
Girls, here's my report on cutlets.)


Wild couple cutlets (from elk and wild boar meat) (Omela)

Meat grinder CASO FW 2000

The meat went on without slowing down. the pusher did not help. By the way, in the review they wrote that the pusher is not convenient. I liked him very much. The ball fits very comfortably in the hand. The only drawback, also mentioned in the review, is quite noisy. You won't be able to smoke meat at night.
Masinen
Yeah, a bit noisy, at night she will definitely not work with her))

By the way, the pusher confused me at first glance, but everything was fine during operation. Very comfortable, the only thing is if it was wider, the size of the meat inlet, it would be even better.
Omela
Quote: Masinen
Very comfortable,
yes, it was convenient for me too.

Quote: Masinen
the only thing if he was wider,
Then he would not enter with soft products due to air resistance. I didn't need it with meat at all, but with dough, yes, it was problematic. (
Masinen
Omela, Well, or something in between to do so that there are fences, where the air goes out, the area is pushed more))

We'll think of it here)))

Omela
Quote: Masinen

We'll think of it here)))
I looked at Zelmera. there the pusher does not taper to the bottom, it seems to me that this is the most optimal solution. Let the Germans take it into account.

By the way, I also remembered what I liked was the suction cups on the legs. I didn’t even know that they were there, I didn’t deliberately press the meat grinder. Only when she was about to clear the table, she could not lift it, so it sucked.
Masinen
Omela, by the way, about the suckers, I specifically said in the video review))
Omela
Masinen, well done, you, go and read the instructions, except from others.

I'm with cookies.


Lean cookies through a meat grinder (Omela)

Meat grinder CASO FW 2000
Masinen
Quote: Omela
I read the instructions

Yeah, and sooo carefully))))
torturesru
Quote: Omela
By the way, I also remembered what I liked was the suction cups on the legs. I didn’t even know that they were there, I didn’t deliberately press the meat grinder. Only when she was about to clear the table, she could not lift it, so it sucked.
There is a twofold question, on the one hand the car will hold up well, on the other hand, as if such legs did not come off in a couple of months, I have a Pioneer DVD-recorder without legs :(
torturesru
By the way, does anyone know how serious this company is? Will there be problems with spare parts later, with the same safety sleeve? Panas then puts the circuit breaker as a fuse, and then there is a plastic sleeve that should burst.
Masinen
torturesru, This should be checked with off representatives.
Omela
Masinen
I also want to make cookies, though not lean, maybe for lean we have you, Ksyusha, special)))
Omela
There are no problems with fake ones, the recipes are dark.) I'll try to find my oldest one from my childhood. was still written in the notebook. I'll look for it.)
Omela
Found .. brutal composition. But I remember it was delicious.
Mayonnaise 1b (250ml)
eggs 2 pcs
Sugar 1 tbsp. (250 ml)
Margarine 200 g
vinegar 1 tbsp. l.
Soda 1/2 tsp
Flour 3-4 tbsp (250 ml)
The dough should not be tough, but elastic and not sticky to your hands.
Masinen
Omela, listen, is it possible without mayonnaise, I don't really respect him))
And the rest is normal))
and probably soda with vinegar can be replaced with baking powder, right ??
Omela
No, well, you can make mayonnaise yourself. It was just with this composition that flagella were obvious. and so, look in the internet, there are many options.)
Masinen
Ok, I'll make the mayonnaise myself. I want to try this recipe))
Omela
Come on, it is written, you need flour first 3st. add, then add in fact.
Svetlenki
Masinen, Omela, girls, are you still happy with your meat grinder? Of course, I was very impressed by how she twisted the mutton peritoneum of Masha and did not sneeze. I have been walking for a week now and I want this meat grinder very much.

And another question - where is the fracture knot, that is, where is the plastic that will break if suddenly a bone gets in, etc. For many meat grinders, the screw tip performs this role, but in Caso where is it? It seems like everything looks like metal
Masinen
Quote: Biryusa

On the trunk there, just with a picture
🔗
I was impressed by the photo of the insides - both gears and splines - all made of metal

Here you can see its insides by reference, everything is shown in close-up there.

I am happy, here I am preparing a recipe.
Yesterday I was spinning a beef neck cut with veins, films and all the delights on it, I chose it especially in Auchan))
Scrolled, just like that, without any problems.
I photographed everything, though I didn't shoot the video.
Svetlenki
Mash, thanks a lot for the link. I looked ... Probably I will order. They are not yet available on the German Amazon, but you can place an order and deliver as soon as they appear ... Really, everything is sensibly done in it, conscientiously!
Lerele
Svetlenki, what is there then ?? It's like in Greece ...
🔗
Christmas trees, again I did not read the post to the end and soon put the link
Masinen
Sveta, and Lerele wrote that they seem to be on sale.

In, I told you))
Lerele
Masinen, write that you order, and we will deliver as soon as they will. But you can order. Usually, when there is no article, they write inaccessible, but here it seems to be available, but later. And when, they will inform you by email. And before there were, delivery was a couple of three days.
Yes, and the money will be withdrawn only when the meat grinder is sent.
Svetlenki
Lerele, I study German from the German Amazon But thanks anyway for the link ... Did you order it yourself? I thought maybe February can wait - then the most interesting prices Amazon gives German. I bought myself an assistant-ankarsrum last year for ridiculous (for him) money ... But I feel that I can't stand it - this is just, and the model is new and seems to be in demand - these are two ...
Lerele
Svetlenki, no, did not order. I am toil, I think, but I live here all the time without a meat grinder, we sell good minced meat. So I want to, and I don't know why I need it.
But if the meat had to be twisted, I would certainly have ordered it.
Today I went to a boutique, and there minced meat in angebot for 4 euros, pinkish, I bought it right away, I thought - no, I don't need a meat grinder
Franky
Quote: Lerele
but I live here all the time without a meat grinder
... but in vain ... to be honest. purchased minced meat is a different product ... that is, of course, if you ask to scroll in a butcher's shop - then okay. But ready-made - it's too fat for me. Cutlets on purchased minced meat are greatly reduced when frying .. but not on "own".
And fish cakes are delicious too. blenders make minced meat differently, this is not quite what you need ... A meat grinder is a necessary thing, even if it is rarely used. I buy goulash for minced meat - it is not very expensive, moderately greasy and you can immediately throw it into a meat grinder.

torturesru
And another question - where is the fracture knot, that is, where is the plastic that will break if suddenly a bone gets in, etc. For many meat grinders, the screw tip performs this role, but in Caso where is it? It seems like everything looks like metal
No, the tip of the auger should not be such a knot, because changing the entire auger is expensive for the safety unit. In this model, it is
The gearbox, made of durable plastic, is packed with steel gears, with the exception of the first - safety gear. The manufacturer also did not regret the lubricant - obviously, it was laid not just for the entire service life of the device, but with a multiple reserve.
Usually they put either the bushing at one of the gears or the entire gear. If the tip or socket of the auger burns or collapses, which is sometimes written about by Bosch, especially with a juicer. More expensive models such as Bork or Panasonic have a circuit breaker, where when the load rises, the switch is triggered and breaks the circuit. But only if it does not work, the gear in the gearbox breaks down, because the pleasure of replacing is not the cheapest. This is not a Zelmer, where you can change the sleeve yourself.
Svetlenki
Quote: Lerele
and there is minced meat in angebot for 4 euros

I envy white envy!

Lerele, you know, but we don't have minced meat, but the devils ... I ruined the manty in the literal sense of the word, the dumplings are mediocre ... Well, maybe even for cutlets ... The Germans seem to me more versed in meat and minced meat than the British, here and sausages are made for a mass market with a meat content of at best 50%, as well as bread crumbs and so on ...

It's like I come home to my mother, but she is only in a meat grinder herself - the aroma is completely different for the products

We also sell the peritoneum of lamb, which is so cool, I saw the cutlets as Machines - and I disappeared.

Maria, manufacturers should encourage you for marketing! You are so smart - the videos are cool and you!
Lerele
Franky, and I buy in a roar, I like their minced meat, and angebots often come to it.
It's clear that home is better, damn it, I'll think again, I want her actually
Franky
Lerele, think about dumplings!
Lerele
Svetlenki, the meat is different there, like you, the meat does not smell for real, and does not spoil for a week without freezing, it just stands calmly in the refrigerator, what they are fed here, I don’t know.
Lerele
Franky, temptresses !! I think !! All the time, I do them often.
Svetlenki
Quote: torturesru
Usually they put either the bushing at one of the gears or the entire gear. If the tip or socket of the auger burns or collapses, which is sometimes written about by Bosch, especially with a juicer. More expensive models such as Bork or Panasonic have a circuit breaker, where when the load rises, the switch is triggered and breaks the circuit.

torturesru, thanks for the explanations - you can feel the masculine approach of a techie. I reread your message three times, until I got about what you are talking about ...

Panasonic disappears - it is stupidly absent in Europe, Bork (although it is German) - in Germany it is also absent on Internet sites ...

So all the same, returning to the rupture node in CASO, it will be possible to repair it yourself if suddenly? Of course, I have 1 year for a return-exchange, but I would like to know right away.

Thank you
Franky
I will say so. a good grinder is almost an eternal thing. My Brown has already changed the knife for 20 years, probably 2 times. Well works and works. Not too often, but reliable. will outlive us all. In terms of durability, it surpasses (should, at least) all newfangled multicooker
Mind you, I’m not trying to persuade you. But how can such a beautiful girl have no meat grinder! : nea: Disorder.
Svetlenki
Franky, I too am inclined to your opinion.

Sometimes I fry store-bought minced meat for lasagne, and there all sorts of such strange little white pieces come across ... And my friend also hurt me. Her husband is a butcher in a butcher's shop, so he says that in the minced meat in supermarkets they put all kinds of by-products that I would not want to eat (these are not lungs-heart-liver)

Butcher shops are cool, of course you can buy the meat you like and they will dare you, but it's too expensive
Svetlenki
Lerele, you know, what still bothers me - why is minced meat SO MUCH cheaper than regular meat, even frozen? WHAT do they put in there? We have really minced beef and mutton 20 percent cheaper than the cheapest beef and lamb
Franky
Svetlenki, here's another German to practice
🔗
this meat grinder is in 3rd place out of 13 (November test)
Svetlenki
Franky, Julia, thank you. The distribution of the leaders' places confused me, to be honest. Gastrobak's knife is not saber-shaped - as soon as I saw this fact, it immediately cooled down, so to speak, Kenwood yells like I don't even know what is the same with a knife in my opinion ...

I am even more convinced that Caso will most likely be ...

I also look at my mother ... She has Brown, which I bought for her as a student 20 years ago ... She plows, but already there something has worn off strongly ...

All recipes

New recipe

New Topics

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers