Mariina
Uv., Members of the forum, can someone come across and help me ... I have an Airfryer with touch control VES AX 730, a gorgeous little thing, but trouble happened ... it works, but does not heat, I burned out a halogen lamp so flat .. ... Where can you replace it and how much will it cost? Thanks in advance for the answers
VOLGOV
Quote: Maryina

but trouble happened ... it works, but does not heat, I burned out a halogen lamp so flat ...
I also think it's not worth it fortune-telling it is better to contact Service, and repair assistance can be obtained, for example 🔗 having issued a topic in the appropriate section, but this forum exists for specialists and without passing the entrance exam you will not be able to open a topic here (protection from freeloaders).
sazalexter
Mariina If you do not find C / C VES, try contacting Hotter service
🔗
sazalexter
Quote: sazalexter

Mariina If you do not find C / C VES, try contacting Hotter service
🔗
Oh wildly sorry, did not immediately consider
It doesn't matter where you bought the Airfryer or other HOTTER equipment - in Moscow, the Moscow region or any other city; in the "Seven Hills" brand store or at our dealers, but remember - the sale of recipe books, accessories, as well as warranty and post-warranty service are carried out only with the "HOTTER" Warranty Card ("Seven Hills").

Take care of your Warranty Card, check the correctness of its filling at the point of sale!

Our Service Center does not accept for repair microwave ovens, convection ovens, toaster ovens, grills, as well as "Flavor wave Turbo oven", other brands of air ovens, including those brought from Europe and the USA. Please contact the appropriate authorized service center.
Although in St. Petersburg AG and other firms are being repaired
den999
you need a service center
the address of the service center is indicated on the warranty card or the seller can tell you the address
balerian1
I got here the other day in the repair of an airfryer. Practically new, the client only baked chicken a couple of times. But either the heart was unlucky, or for some other reason ... only during the second preparation, his bowl burst ... and when the device was turned on for the third time, the device stopped giving signs of life (the display is on, but does not respond to the program selection buttons ). After disassembling the unit, the reason for this inappropriate behavior was found out. The button to turn off the device fell apart when the cover was lifted - the plastic turned out to be rather weak. The repair by assembling and gluing the button took 5 minutes ... but disassembling the unit itself turned out to be not very easy. In the end, everything works fine ...
Here is a photo of the "hero of the occasion"
VES-747D repair secrets VES-747D repair secrets
VES-747D repair secrets VES-747D repair secrets

Photo of the control board
VES-747D repair secrets

Disassembled photo of the device itself
VES-747D repair secrets

In conclusion, I would like to add that the build quality of this device is much better than the Hotters brought in for repair!
Vichka
: hi: I looked at the insides of the AG and as if I had an operation. 🔗Health and health to our AG !!! 🔗
Lёlka
I got here the other day in the repair of the airfryer. Practically new, the client only baked chicken a couple of times.
balerian1, and can I contact you to repair my AG? A similar problem. I have an old AX 730 2006. I cooked it on it several times: bam - from the top of the cabinet something fell on it (I don't remember what)! The bowl was broken. Waited a long time for a bowl in the service. Finally, I brought it. And I pushed my AG into the far corner, so as not to interfere (the kitchen is not full 6 m). Once I decided to cook in it. It feels good. But then I poured water for self-cleaning, but I didn't turn it on right away (I can't remember why). After some time, she began to press the buttons - the display is on, but does not respond to the choice of programs. I turned to the nearest service - I was advised to go to the VES service. But I don’t have a car, and I didn’t want to use this unit on myself. So it has been for a year. Write to me in a personal, pliz, where is your service (my son is buying a car the other day, I think he will take you). I hope for a positive answer
Lёlka
Valery! Thank you very much for your prompt reply! I hope there will be nothing wrong with the repair. Only transport remains for delivery
balerian1
will have to make a small revision of the AG, which in no way affects its work ...

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers