Iron with steam generator

I have a karcher with an iron (I really doubted whether I needed it, since there is a good ordinary iron and I'm not a fan of ironing). I strongly advise that the ironing time is reduced by 2 times with twice the improved quality, the steam and temperature are adjusted separately, the iron itself is light, there is enough water for the entire ironing, unless of course you iron the entire chiffoner, in general I am very pleased that I bought it with an iron, from I have a Karcher 5800, but I think 1030 also strokes normally.

Alycha, thank you for your feedback, but how does the Karcher iron behave when ironing delicate fabrics, does not stick, does not burn, does not spoil the fabric? Is vertical steaming possible?

I read about the vertical one, but I have not tried it yet, but the delicate fabrics are delayed by autumn, the temperature was set well. Washing and a lot of steam did not spoil anything, ironed and a thin sweater and silk, but also coped with jeans with a bang

ladies and gentlemen, can you please tell me about a board for an iron with a steam generator ... active oh or inactive, but comfortable. So that with a solid support for this very water tank, so that it does not get wet during steaming and during prolonged ironing, with a good coating and a correct frame.
Tell me what you have, please. And then my board is old and simple, the coating is worthless, and for some reason it gets wet quickly even when using a regular Tefal iron. There is an iron for the Karcher steam cleaner, so I practically cannot use it at all, since wet spots from the board appear on things.

I have a board the usual truth on it lies a rag so plump it is sold for ironing boards linen does not get wet I use an iron for karcher

ladies and gentlemen, can you please tell me about a board for an iron with a steam generator ... active oh or inactive, but comfortable. So that with a solid support for this very water tank, so that it does not get wet during steaming and during prolonged ironing, with a good coating and a correct frame.
Tell me what you have, please. And then my board is old and simple, the coating is worthless ...

Knock on to Aunt Bessa, she recently bought a board with vacuum, blowing and the board heats up by itself.

Hello!
I, like many, of course, am not a fan of ironing, but the most important thing is why I think about something more than just an iron,
this is the smoothing of delicate fabrics, ruffles, frills, sleeves on blouses, and on shirts too.
You can use something without touching, so as not to iron on one side, smoothing on the other, as I always do in my own places and in my daughter's.

Hello!
I, like many, of course, am not a fan of ironing, but the most important thing is why I think about something more than just an iron,
this is the smoothing of delicate fabrics, ruffles, frills, sleeves on blouses, and on shirts too.
You can use something without touching, so as not to iron on one side, smoothing on the other, as I always do in my own places and in my daughter's.

Miracles do not happen, alas. The active board and the iron with a steam generator make ironing very easy, of course. But so that the sleeve does not have an arrow in the center, you still need to be sophisticated (put it on the corner of the board, clamp the air outlet, inflate the sleeve, and then iron). Personally, I'm not so worried. I iron men's shirts with an arrow on the sleeve, and my things, which you butt butt, simply don't exist now, I've worn out like a class. Much depends on the quality of the fabric. Overdried flax, even with all the accessories, is not suddenly smooth. And many delicate and woolen fabrics can be smoothed out without touching the iron at all. On board and steam blowing mode.The blowing mode of the board allows you to iron on the front side without printing seams. Only an iron with a steam generator is better than just an iron, but without an active board, this is all early, only 50% of the possibilities.

So it turns out that an iron with a steam generator just smoothes dense natural fabrics or overdried laundry easier, right?
Can't you use it as a vertical steamer? I now dream of everything, as already mentioned here, so that both in stores, as they steam ideally any things.
What about curtains, tulle? How well does it stroke without touching? so that folds are not smoothed out, the reverse side is not printed, the fabric does not shine. What models are still worth seeing?
And what is an active board? What to see?

Girls, and in comparison, no one tried the steam station and the Karcher system steam cleaner 1030 (or the like) + iron?

Girls, I read here about steam irons, I also wanted to. My husband promised to buy it by March 8. It remains now to choose a model. I would like, of course, not to overpay much for the brand, but it seems that, apart from the Philips and Tefaley, the rest are not very popular. I'm also looking at the Vitek VT-1224 VT model, it costs 4.5 tons, there are almost all the functions you need, the pressure is 4 bars, indication of steam readiness and low water level, constant steam power fixation, a filter to protect against scale, readiness for work in 2 minutes, the ability to refill water and even a platform with LED lighting. The price is not biting and the reviews are good. Or is it worth taking a closer look at brands such as Tefal and Philips? What do you advise?

I have a simple Klatronic model. Long ago. Very much even satisfied.
I do not even know if all sorts of bells and whistles are needed in this unit.

[Taia,]

Taia, I didn't find steam generators from Klatronic, only the steam cleaner drops out of my list. What model do you have?

It's old, I don't even know what kind of model it is. I used to see such a model on the internet, but now it is no longer.
You need to ask in the search: "iron with a steam generator"
For example: www.
In this link, Bosch is at the same price as Vitek, even a little cheaper.
🔗

Found Indeed, one of the cheapest According to indications, it should be not inferior to expensive models. True, little has been written about him. And I didn't find any reviews at all. Does he also have a constant supply of steam and separately if you press the button yourself? Does the laundry folded into 2 or 4 layers iron? Cope with vertical ironing?

Does he also have a constant supply of steam and separately if you press the button yourself? Does the laundry folded into 2 or 4 layers iron? Cope with vertical ironing?

How do I know about this particular model?
I have it all. Found a similar model to my iron.

[Taia]

Taia, well so I .. about your model and ask, Klatronic, how is she specifically in business? Describe in detail, if not difficult

Bosch has 7 minutes to prepare for ironing. Too much ..

Ahh, about my ... Please.
Gives a very strong jet of steam for vertical steaming, if necessary. But I have never used this method of ironing, somehow there was no need. There is a button on the top of the handle, while you press it, the steam goes, release it, it stops. There is another button under the handle for continuous steam. But I want to say that I rarely use it, I don't really like ironing when steam is constantly rushing. I iron folded sheets, the very bottom side is ironed well, but you yourself know - not as perfect as the top, where they drive an iron. For an iron with a steam generator, you need a good board, you need such a surface of the board so that steam passes through it from below, otherwise perfect ironing will not work.

Bosch has 7 minutes to prepare for ironing. Too much ..

Well, after all, in the boiler, the water must be heated to a state of steam. It's like in email. teapot. One boils quickly, the other takes longer. I do not believe that there are those who immediately start working. Only if you pour a glass of water into them.
It also takes some time for me to heat up.I’ve got used to it and somehow it’s okay. While it is warming up, I prepare linen, a board, a suitable program for watching on the TV.

[Taia]

Look, what difference does your iron have from the others .. below is a button for constant supply of steam, and above for short-term, and all Philips, Tefaley have the opposite. I'll think about how it will be more convenient. Thank you Taia for the details, I discovered one more model for myself

Bosch has 7 minutes to prepare for ironing. Too much ..

My 2 min. True, I have Siemens.
Do not use an iron / steam generator that does not allow you to independently adjust the steam supply and temperature.

[Taia]

Look, what difference does your iron have from the others .. below is a button for constant steam supply, and above for short-term, and all Philips, Tefaley have the opposite. I'll think about how it will be more convenient. Thank you Taia for the details, I discovered one more model for myself

I have a Tefal GV 8461E0 with just such buttons and manual temperature and steam control https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=3272.60

Do not use an iron / steam generator that does not allow you to independently adjust the steam supply and temperature.

Why is it so categorical, my CAM iron selects the temperature and has not spoiled a single thing yet

I don't know which one you have, but my mother's Phillips has no adjustment, with some kind of "ay-ay-ay" technology, he does not choose anything, the sole barely ironed the bed linen, only if it is folded in half. Claimed 6 bars of steam, compared to 6 bars on my Siemens - like heaven and earth. And at the same time about 12-13 thousand. We must really pay tribute that it was presented to her.
I took him to the service, he did not climb, he was a guarantor. They looked at me as if I was sick and said that they all work like that.

[Dr.NO]

Dr.NO, everyone chooses for himself and for himself. Someone is still ironing the Lysva turbine generator plant and

[Cvetaal]

This is the eternal struggle of Tefal and Phillips. I really like Phillips in design and colors, they even come with illumination, which is important for such a magpie like me. But I want it to be beautiful and reliable. But reading the reviews, there are those who are so dissatisfied with Phillips that they say that this function is really nothing without adjustment, so think about it ... maybe the party is defective I am now even more confused While I look towards the model like Cvetaal - Tefal GV 8461E0, but the price

everyone chooses for himself and for himself. Someone is still ironing the Lysva turbine generator plant and

Perhaps, if there was no steam generator, but there was an ordinary iron, that is, there was nothing to compare with and Phillips would seem like a miracle.
But here the advantage is obvious. Mine allows me to select both the temperature and the amount of steam, it also has two automatic itemp and antishine, I don’t use both functions.

Here is the eternal struggle of Tefal and Phillips

I did not come across Tefal.

[Cvetaal]

While I look towards the model like Cvetaal - Tefal GV 8461E0, but price aa

I bought mine at a stock for 9900, and now the price is 13990 in mvidio, of course, this is too much

[Dr.NO]

Yes, I saw sadness Dr.NO, and which Siemens model do you have?

But here the advantage is obvious. Mine allows me to choose both the temperature and the amount of steam,

In my inexpensive Clathronic, you can also select the temperature and regulate the amount of steam. I assumed that everyone has it.

it also has two automatic itemp and antishine, I don’t use both functions.

That says it all.

It turns out that the Phillips made such a system that the iron itself recognizes the type of fabric and automatically selects the required steam supply Only is it good or bad ... Some, judging by the reviews, complain that because of this it smoothes worse

which Siemens model do you have?

siemens TS45450

That says it all.

The price was too chocolate for him then was 185 euros with delivery cost and the rate was then 43

I'll go read about him
Oooh, looks impressive Purely masculine, solid

Now I have another problem when I iron bed linen at max, steam at max. the board is not with a grid, but with rare holes, the steam does not pass through well. Cover on the board in 30 minutes, at least squeeze it out. I am looking for good on the grid or active.

Dear girls, and the whole truth is that in household appliances stores, they sell household steam generators, very flimsy, with a short service life, because it is not profitable for them to sell high-quality, long-lasting appliances. And the most interesting thing is that industrial steam generators, designed for merciless long-term operation in sewing ateliers, dry cleaners, etc., cost the same as flimsy plastic household ones. Buy industrial steam generators for ateliers, with pressure gauges, designed for intensive and long-term operation, they are designed for 220. And there will be happiness with you. And if you buy an active ironing board with suction, blowing and heating of the ironing board itself, then you will be happy in the square.

[Creamy]

Creamy, do you have one of these? Industrial? Or just while thinking out loud?

blowing and heating the ironing board itself

Can you tell me what warming up gives? And how long does it take to warm up?
The vacuum has already understood - it is needed. And the warming up?

I have an industrial steam generator with a built-in pressure gauge (I see how the arrow moves, shows an increasing or decreasing pressure) and the board is active, heats up by itself, a foot pedal, I press on it when I need it, there is blowing or suction. Do you need to warm up the board? Imagine that the fabric is ironed between the heated soles of two irons.

[Creamy Alevtina]

Creamy Alevtina, well done, great choice!

Here are industrial steam generators and active tables you can see. 🔗 I personally have an ironing table Lelit PA 71, here it is for 17111. And the steam generator itself is from another company Silter.

Girls, gave herself a pig in a bag Phillips Steam Station (according to the action in the Metro). According to the characteristics, it should be good. I will protest, unsubscribe.

[Alyonka]

Alyonka, Congratulations! Well, you've already made up your mind, but I'm still thinking. Be sure to tell everything in detail and show

[Alenka212]

Alenka212, please unsubscribe, I plan to go tomorrow for the same, they also take doubts ...

It's a pity that my city is small ... I would also go to the Metro to look and feel the iron. What kind of model are they selling Phillips for and how much?

mordel GC8375 / 02 for 6299 rubles, but the most interesting thing is that I didn’t find a single review after browsing the entire Internet ... and by the way, the real price too ((

Now I will also try to look in the internet

I looked at the characteristics that were more than excellent. But here's a review of one who dug: "This product did not please for a long time. After a month and a half, I demanded cleaning the tank and no longer generates steam. The lamp of the cleaning requirement does not go out, and therefore does not work. Now it is necessary to prove that it was exploited. I can imagine an impartial conversation with representatives of warranty repair, who will in every possible way reduce repairs to a paid basis. Or maybe not, we'll see. It's a pity to waste time. "
Something is not so rosy this device is presented ... Let's see what Alenka has to say. Maybe the tank needs to be cleaned more often, then it will work? ..
And here I found the price 🔗 If this is really him, then the real discount is obtained in the Metro

We will wait for Alenka, it’s very interesting how he’s at work