tecsun
If you have incorrectly specified the baking mode, pressed START, and you want to change it (but the bread maker remembers the set baking mode when disconnected from the network for 15 minutes, and the ingredients are laid and wait for the start of the batch ...), then in order not to wait for a memory reset, - unplug the oven from the mains, wait 5-10 sec, press the MENU button and, while holding it, plug the bread machine into the mains. The H symbol will appear on the mode indicator. Release the MENU button - the bread maker will start from the selection of the 1st mode. ATTENTION! This function is not documented and is called by you at your own peril and risk! Although it is extremely unlikely that this operation will damage the stove, it is more likely that your stove may simply not have this function. Good luck!
IrinaL
It looks like this function does not work in the QW110130 stove.
I'm in mourning.
The instructions say that the stove remembers the program for 10 minutes.
Unplugged for 20 minutes! She turned it on, and she, the infection, still remembers !!!
I'm afraid it will stop and it will turn out badly. Oh, I'm in a panic, I don't know what to do.
IrinaL
Found by typing. It appears like this. In the QW110130 oven, this is done as follows.

Plug in the socket. Ignoring her actions, you press the stove on / off button for a VERY long time, probably 15 seconds (I was nervous, it seemed to me that it was forever). After which she, finally, with an unhappy squeak, says "Okay, okay, we reset the program" and lets you choose what you want.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers