Built-in vacuum cleaner: remove dust with maximum efficiency

Mcooker: best recipes About technique

Built-in vacuum cleaner removes dust with maximum efficiencyAny living space, be it a house or an apartment, needs regular cleaning. Ordinary dust is harmful to health, and its smallest particles are especially dangerous, which are often not captured by filters of portable vacuum cleaners. Stationary dust removal systems are much more effective in this regard. They take air together with dust into the environment. With regular use of such a system, the air in the room gets rid of a significant part of the dust.

Moreover, cleaning is much easier. There is no need to move a heavy vacuum cleaner from place to place, which can scratch the floor and furniture, no wires constantly getting tangled in your legs. To start cleaning, the hose is connected to a pneumatic valve located in the wall.

The central dust extraction system works almost silently, since the unit with the electric motor is located in the technical room (basement, garage). The power of the installation allows cleaning much faster. The dust is sucked in by the air stream, and the more powerful it is, the better the pollution is collected.



Central dust extraction system design

Built-in vacuum cleaner removes dust with maximum efficiencyThe main component of the built-in vacuum cleaner is the power unit. It is installed in the utility room. If we consider not a private house, but an apartment, then the location of the block may be a balcony. Hidden air ducts depart from the power unit, which are connected to wall inlets. The location of these exits and their number depends on several factors. These are the length of the hose, the area of ​​the rooms and the layout of the apartment or house.

The control cable is laid next to the duct. It is needed for the system to start working when the hose is connected. Moreover, not all air ducts should be involved, but only the one to which the hose is connected. There are a variety of hose attachments available for the hose.

The collected dust goes into the dust collector located in the power unit. And the smallest particles that are not retained by the filters leave with air into the environment through the air exhaust grille.



Features of mounting the built-in vacuum cleaner

The opinion is erroneous that the central dust extraction system can be installed only during construction and overhaul. Of course, this option is more convenient, since the air ducts can be hidden in the floor and walls, behind the suspended ceiling and other elements. But when this is not possible, the air ducts are simply laid along the baseboards or under the ceiling and closed with decorative boxes.

The branching of the system and the number of pneumatic valves depends on the layout. If it is open, then one or two outputs are enough.

For houses of different sizes, different types of built-in vacuum cleaner equipment are used. In cottages with an area of ​​up to 500 square meters, a unit with a collector motor can be used, and with a larger area, the unit's motor must be asynchronous.

Currently, central dust extraction has the best performance, environmental and hygienic performance. There is no worthy alternative to such cleaning yet.

I. V. Osokina


Electric brooms

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers